Welcome to Volund Gearworks Store

Frequently Asked Questions

How do I choose the correct size?


SIZING

Atlas Belts are measured in inches, unlike your pants size. To get an accurate actual measurement for the belt you will want to follow these steps:

1. Confirm you are wearing pants; in particular use the pants you most commonly wear.

2. Tuck in anything carried In Waist Band (IWB), undershirts, girdles, etc.

3. Measure around your waist, over you pants where your belt would ride. A tailor’s tape or even a string that you mark and measure after works fine.

3.5. You can also measure a belt you already use, from the buckle end to the most worn spot or hole. Just make sure this is a belt you’ve used that your new Atlas Belt will perform the same function. A casual or dress belt you wear with slacks is generally not sufficient.

4. This number is your actual waist measurement and you can use this number to choose your belt size. If you have any questions feel free to drop us an email but hopefully this simple How-To will help.


Atlas Belts are cut to an overall length (OAL), which can fluctuate slightly during sewing and finishing.  The belts are designed to overlap to fit properly and the minimum overlap needed is around two to three inches. Listed below is the OAL of the belts and the general fit range in inches.

XS 24”-30” OAL: 34”
SM 28”-34” OAL: 38”
MD 32”-38” OAL: 42”
LG 36”-42” OAL: 46”
XL 40”-46” OAL 50”
XXL 44”-50” OAL 54”