Welcome to Volund Gearworks Store

2" Micro Battle Belt V3

Be the first to review this product

Availability: In stock

2" Micro Battle Belt V3 is available for purchase in increments of 1

Quick Overview

The V1 led the way to the Micro Belt revolution, the V2 brought innovative options to the original design, and now the V3 continues the evolution of the low profile highly versatile battle belts. Lighter and even lower profile than the V1 with both horizontal and vertical molle mounting options. Very pleased with this design!

These particular belts are made to order. Lead times average 1 - 3 weeks and can be a bit longer or even shorter depending on order volume. If it shows "Out of Stock" then the current workload is quite large and ordering has been closed for the time being until lead times are back where we like them.

Rest assured you will not have to wait months for your order, but let us know if you’re up against a tight deadline and we’ll give you a better idea of current lead times.

Attach kit all the way up the buckle.

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • VERY low profile.
  • Attach kit all the way up the buckle.
  • Hook tab on the end to secure the overlap.
  • V1 vs V3
  • V1 vs V3
  • V1 vs V3
  • Mount kit vertically or horizontally.
  • Are we done working yet?
  • Tek Loc on a V2, the V3 is a little thinner so they will mount up just fine.

* Required Fields



Lighter, Lower Profile, and more Forgiving on the body. A single layer of 2" scuba webbing, two layers of 2" flat webbing and a full 2" wide HOOK or LOOP lining running the entire length of the belt body. Less stiff than the double layer scuba webbing brethren while still maintaining great stability for mounted kit. The V3 must still overlap when closing but the keeper loop on the V1 model has been dropped and a small section of opposing material allows the overlapping ends to stick together. The 1" tail is attached nearly 12" back from the end of the belt body easily giving 8" of adjustability.

Molle gives the ability to lock molle/pals pouches into place and fixing their height. There is a ½” strip running along the top and bottom edges, tacked in 1.5” spacing, and a 1” gap along the center. Additional 1” webbing is attached vertically along the center of the belt as well. The short and sweet of this is the ability to attach pouches both vertically and horizontally on the belt, or weave plastic restraints along the body tucked securely behind your pouches. Endless possibilities.

Tek-Loks will mount to this design and holster slide mounts like the UBL from Safariland will slide onto the belt body much easier than the V1 and V2 models.

Use a Liner Belt in your pants covered in the opposing material and the V3 will stick to the inner belt for a rock solid setup. We recommend ordering the V3 lined with soft LOOP material so the belt can be donned over top clothing or foul weather layers without worry that the inner lining will abrade or cause damage to soft goods. LOOP material also picks up much less debris and is easier to clean than the stiff scratchy HOOK material.

If you absolutely need one lined with hook they can be ordered with that option now. We usually advise against having a wide belt lined with hook, as stated above. Since the belt will be wider than the pants liner there could be abrasion on the clothing worn underneath, especially if the belt is ever donned over top inclement weather layers.

Belt Body CUT TO Lengths:
SM 38"
MD 42"
LG 46"
XL 50"
XXL 54"

Remember to take into account anything that may be worn under the Micro Battle Belt and take your measurements accordingly! The belt needs to overlap about 1.5 inches at least to fit properly at it's largest and can cinch down around 8" if lots of wiggle room is needed.....winter layers, Taco Tuesdays, etc.

Lead times average 1 - 3 weeks and can be a bit longer or even shorter depending on order volume. Rest assured you will not have to wait months for your belt, but e-mails simply stating, "Where's my order?" will be ignored....


Currently available in Black, Coyote Brown, MultiCam, MultiCam-Black, Wolf Gray, Ranger Green, Highlander and Typhon.


Rather than discounts to this or that group the prices are kept the same for everyone all the time. Rarely some orphans will be posted on our FB page to clear out some oddball stock at sale pricing but that’s not a regular thing. Many companies raise prices across the board to offer “discounts” to folks and we always thought that was janky.

Please add Signature Confirmation to your order HERE if there is any chance your package could be stolen after delivery, like if it sits on your porch or the complex holds packages at the front desk. WE WILL NOT REFUND OR REPLACE ORDERS THAT SHOW DELIVERED VIA TRACKING INFO.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.